Products
Column Moving 5-Face - CM Series



Feature

Z&W-axis Design-axis Design
-Z-axis is driven by servo motor and lead screw,it can steadily provide the power foe heavy duty machining,and achieve the best response of cutting.
-A high response closed-loop hydraulic counterweight device is utilized to support the headstock and balance the load of Z-axis motor for optimum precision and better acceleration.Moreover,the headstock will be fully supported and not fall due to gravity even when emergency power off.
-W-axis is optional,which can raise the height for more extensive machining area.

Driven by Rack and Pinion
-X/Y-axis is driven by high-rigidity rack and pinion,and equipped with master-slave double servo motors to eliminate backlash.it can ensure the movement of X/Y axis not be affected by backlash,where by achieving the demand for high-precision.
Large Cutting Space
-Open space is available for machining and unloading large parts . The fixed table is designed for heavy-loaded workpiece , and therefore the machining is independent of the weight of the workpiece .
Angular Heads
It is optional to select various kinds of head with automatic head changer. Mechanical spindle with Siemens motor, high torque output can increase cutting ability.

-Tool Holder:BT50
-C-axis Angle:5 degree
-Max. Speed:3,500 rpm
-Max. Cutting Load:650Nm

-Tool Holder:BT50
-C-axis Angle:5 degree
-Max. Speed:3,500 rpm
-Max. Cutting Load:300Nm

-Tool Holder:BT50
-C-axis Angle:5 degree
-Max. Speed:3,500 rpm
-Max. Cutting Load:650Nm
Specification
Description | Unit | CM-43 Series | CM-53 Series | CM-75 Series | CMW-55 Series |
---|---|---|---|---|---|
Travel | |||||
X-axis Travel | mm | 8,000~20,000 | |||
X-axis Travel | mm | 5,300 | 6,300 | 8,500 | 6,500 |
Z-axis Travel | mm | 1,600 ( OPT. : 1,800 ) | |||
W-axis Travel | mm | - | - | - | 2,000 |
Distance between to Columns | mm | 4,300 | 5,300 | 7,500 | 5,500 |
Working Table | |||||
X-axis | mm | 8,000~20,000 | |||
Y-axis | mm | 3,300 | 4,300 | 6,500 | 4,500 |
Spindle | |||||
Spindle Output | kw | 43/85 | |||
Max. Speed | Nm | 587 / 1,173 | |||
Max. Torque | rpm | 5,000 | |||
Feed Rate of X/Y/Z-Axis | |||||
Axis Drive | X/Y-axis: rack and pinion Z-axis: ball screw ( W-axis: ball screw ) | ||||
Rapid Traverse | m/min | 12 | |||
Cutting Feed Rate | m/min | 5 | |||
Tool Magazine | |||||
Tool Holder | BT#50 | ||||
Capacity | pcs | 60 |
Note : Specifications are subject to change without notice. *We can customize to meet customer requests.


